Riverbed® Steelhead® RiOS® Application Administrator's Guide 2010-10

Managing the HP AllianceONE Extended Services zl Module with the Riverbed® Steelhead® RiOS® Application

Modifying the Zone Policy Configuration on the Steelhead Application

Note Do not assign a Steelhead interface to the SWITCH_SELF or BYPASS zones.

3. Enable the zone policy.

a. Name the zone policy.

amnesiac(config)# in-path procurve zone-serv-pol

name <name>

Replace <name> with the name you want to assign this zone policy.

For example:

amnesiac(config)# in-path procurve zone-serv-pol

name Steelhead-Interception-Rules

b. Enable the zone policy. For example:

amnesiac(config)# in-path procurve zone-serv-pol

enable

4. Save your configuration changes:

amnesiac(config)# write memory

You will be prompted to restart the optimization service.

5. Restart the service.

amnesiac(config)# restart

6. Check your configuration settings:

amnesiac (config)# show in-path

Enabled: yes

Kickoff: no

Maintain Multipath: no

Main Interface: inpath0_0

Asymmetric Routing Detection: yes

Asymmetric Routing Pass Through: yes

Optimizations Enabled On:

inpath0_0

VLAN Tag IDs:

inpath0_0: 1