Riverbed® Steelhead® RiOS® Application Administrator's Guide 2010-10

26
Managing the HP AllianceONE Extended Services zl Module with the Riverbed® Steelhead® RiOS® Application
Verifying the Status of the Steelhead Application
Note Software versions K.15.xx do not currently support the HP AllianceONE
Extended Services zl Module with Riverbed Steelhead RiOS Application.
Check the release notes of a K.15.xx version to determine if it supports this
product.
If the switch software needs to be updated, see Chapter 2: “Hardware Instal-
lation” in the HP AllianceONE Extended Services zl Module with Riverbed
®
Steelhead
®
RiOS
®
Application Installation and Getting Started Guide.
show ONE_app
To operate correctly, the zones and zone policies that you create on the HP zl
switch must be associated with the Steelhead Application. You can verify this
by entering the following command:
hostswitch# show ONE_app <slot_ID>
(If necessary, you can use the show modules command to view the slot in which
the Extended Services zl Module is installed.)
For example, you might enter:
hostswitch# show ONE_app c
In the following output, notice that the output indicates “no zone policy is
serviced” by this Steelhead application. The required configuration on the
Steelhead Application has not been completed.
Application Name: STEELHEAD
Application Instance: STEELHEAD-C
Application Status: Start
Application Heartbeat Status: Active
Connection Status: OK
No zone policy is serviced by this application!
Application-Health Heartbeat Configuration:
Application Name: STEELHEAD
Application Instance: STEELHEAD-C
Status: Active
Stats:
Heartbeats received: 16038
Failures: 0
Heartbeats received toward resuming: N/A
Configuration: