Riverbed® Steelhead® RiOS® Application Administrator's Guide 2010-10

A-1
Appendix: Command-Line Reference for the
Services OS
Overview
This chapter describes the commands in the command line interface (CLI) for
the Services OS provided with the HP AllianceONE Extended Services zl
Module with Riverbed
®
Steelhead
®
RiOS
®
Application.
The Services OS is primarily intended for blade maintenance, not for config-
uring the application. You can access this OS as an operator or as a manager.
Table A-1. ServicesOS CLI Context Command Groups
Command Syntax Statements
Syntax: ip <dhcp | <IP address> <subnet mask> >
Syntax: ip default-gateway <gateway IP address> [metric]
Syntax: services <slot ID> name <services name>
Vertical bars ( | ) separate alternative, mutually exclusive elements.
Square brackets ( [ ] ) indicate optional elements.
Braces ( < > ) enclose required elements.
Angle brackets within square brackets ( [ < > ] ) indicate a required element
within an optional choice.
Angle brackets within angle brackets ( < < > > ) indicate a required element
within a required choice.
All italics indicate variables for which you must supply a value when execut-
ing the command.
Command Group Description Prompt (if module is in slots A and C) Page
Operator A limited number of read-only commands hostzlswitch(svcs-mod-C)> 3
Manager A few commands for troubleshooting the
module and installing software
hostzlswitch(svcs-mod-C)# 6