Riverbed® Steelhead® RiOS® Application Administrator's Guide 2010-10

A-3
Appendix: Command-Line Reference for the Services OS
Services OS Operator Context Commands
Services OS Operator Context
Commands
To access this context, enter the following command from the host switch’s
operator-level context:
For example, if you want to enter the Services OS for the Steelhead Applica-
tion in slots A and C, enter one of the following commands:
hostswitch> services c 1
hostswitch> services c name svcs-mod
To verify your location in the CLI, check the prompt. In the Services OS
operator context, the prompt is one of the following:
■ hostzlswitch(svcs-mod-<slot ID>:SvcOS)>
This is the prompt that is displayed if you have entered the Services OS
CLI and the Services OS is booted.
■ hostzlswitch(svcs-mod-<slot ID>:App)>
This is the prompt that is displayed if you have entered the Services OS
CLI and the ONE-App OS is booted.
The commands in this section are the Services OS operator CLI commands
with the Services OS booted.
exit
The exit command moves you back to the host HP switch CLI.
Syntax: exit
This command is available from all contexts.
Syntax: services <slot ID> < 1 | name svcs-mod >
Moves you to an OS context on the module.
Replace <slot ID> with the letter for the lower chassis slot in
which the module is installed. The Services OS context is
always assigned index number 1.