Riverbed® Steelhead® RiOS® Application Administrator's Guide 2010-10

A-9
Appendix: Command-Line Reference for the Services OS
Services OS Manager Context Commands
page
This command enables and disables page mode. In page mode, the terminal
output will pause when it fills the screen and wait for a keystroke such as
space
or Ctrl+C.
Syntax: [no] page
ping
Use this command to send an ICMP echo to a specified destination.
Syntax: ping < IP address >
Replace <IP address> with the IP address of the ping destination.
For example:
ProCurve(services-module-<slot ID>)> ping 10.1.1.1
When you send ICMP echoes, the module displays the ping statistics to
describe the types of responses the router receives.
sync
This command synchronizes the metadata on the ONE-App OS with the
metadata in a file (the metadata reports information about the OS to the HP
zl switch).
Syntax: sync ONE-app <local <file> | usb <file> | remote ftp <IP address> <file>
[user <username>] >
You can sync the OS with a file that has been copied or downloaded to the
module (local). Or you can sync it with a file on a USB device. You can also
contact an FTP server and sync the metadata from a file there.
For all of the options, replace <file> with the name of the file to which you are
synching the OS. For the ftp option, replace <IP address> with the address of
the FTP server. If the server requires authentication, type user and the user-
name.
uninstall
Use this command to uninstall operating system software from the module.
Syntax: uninstall < ServicesOS | One-app >