Riverbed® Steelhead® RiOS® Application Installation and Getting Started Guide 2010-10

3-12
Getting Started
Initial Configuration
b. Enter the “no” form of the class zone command:
hostswitch(config-policy)# no <sequence number>
class zone <source zone name> <destination zone
name> action intercept unidirectional
3. Exit the policy configuration context:
hostswitch(config-policy)# exit
4. Save the configuration:
hostswitch(config)# write memory
Determine if the Steelhead Application Is Associated with the
Zone Policy
You have created the zone and zone policy, but they are not yet associated
with the Steelhead Application. You can verify this by entering the following
command:
hostswitch# show ONE_app <slot_ID>
(If necessary, you can use the show modules command to view the slot in which
the Extended Services zl Module is installed.)
For example, you might enter:
hostswitch# show ONE_app c