Riverbed® Steelhead® RiOS® Application Installation and Getting Started Guide 2010-10
Table Of Contents
- 1: Overview
- 2: Hardware Installation
- 3: Getting Started
- Initial Configuration
- Configure the Steelhead Application
- A: EMC Regulatory Statements
- B: Waste Electrical and Electronic Equipment (WEEE) Statements
- C: Hardware Components
- D: Software Components
3-13
Getting Started
Initial Configuration
The following output reflects the example configuration explained in previous
sections. Notice that the output indicates “no zone policy is serviced” by this
Steelhead application.
Application Name: STEELHEAD
Application Instance: STEELHEAD-C
Application Status: Start
Application Heartbeat Status: Active
Connection Status: OK
No zone policy is serviced by this application!
Application-Health Heartbeat Configuration:
Application Name: STEELHEAD
Application Instance: STEELHEAD-C
Status: Active
Stats:
Heartbeats received: 16038
Failures: 0
Heartbeats received toward resuming: N/A
Configuration:
Heartbeat interval: 1000ms
Heartbeats missed before failure: 10
Heartbeats missed before soft reboot: N/A
Heartbeats missed before hard reboot: N/A
Heartbeats required before resuming: 1