Riverbed® Steelhead® RiOS® Application Installation and Getting Started Guide 2010-10
Table Of Contents
- 1: Overview
- 2: Hardware Installation
- 3: Getting Started
- Initial Configuration
- Configure the Steelhead Application
- A: EMC Regulatory Statements
- B: Waste Electrical and Electronic Equipment (WEEE) Statements
- C: Hardware Components
- D: Software Components
3-31
Getting Started
Configure the Steelhead Application
Connection Status: OK
Policy Used: Steelhead-Inception-Rules
Policy Status: Active
Policy Expires: Never
Bind Port: C1 (Link Up)
Normal Port: C2 (Link Up)
Fail Action Type: Bypass
Fail Status: No failure
Times Fail-Action applied: 0
Application-Health Heartbeat Configuration:
Application Name: STEELHEAD
Application Instance: STEELHEAD-C
Status: Active
Stats:
Heartbeats received: 344752
Failures: 0
Policy Used: Steelhead-Inception-Rules
Policy Status: Active
Policy Expires: Never
Bind Port: C1 (Link Up)
Normal Port: C2 (Link Up)
Fail Action Type: Bypass
Fail Status: No failure
Times Fail-Action applied: 0
Application-Health Heartbeat Configuration:
Application Name: STEELHEAD
Application Instance: STEELHEAD-C
Status: Active
Stats:
Heartbeats received: 344752
Failures: 0
Heartbeats received toward resuming: N/A
Configuration:
Heartbeat interval: 1000ms
Heartbeats missed before failure: 10
Heartbeats missed before soft reboot: N/A
Heartbeats missed before hard reboot: N/A
You can now optimize WAN traffic using the Steelhead Blade. To configure
Steelhead Blade features and to manage optimization, use the Steelhead
Management Console.