SBM powered by Microsoft Lync Administrator's Guide 2010-11

6-20
Troubleshooting
Implement a Loopback
Figure 6-10. Remote Desktop Command Prompt—wanpipemon Command for
Checking the Status
Disable Echo Cancellation. Enter this command to start configuring echo
cancellation:
Then disable echo cancellation:
Syntax: wanec_client <interface ID> config
Replace <interface ID> with the ID that you determined ear-
lier.
Syntax: wanec_client <interface ID> disable all
Replace <interface ID> with the ID that you determined ear-
lier.