SBM powered by Microsoft Lync Administrator's Guide 2010-11

1-6
Introduction
Ensure that You are Ready to Complete the Setup Wizard
Figure 1-1. SIP Ports
 SIP transport protocol for communications from the Media Gateway to
the Mediation Server:
• TLS (recommended)
•TCP
This is the protocol defined for the SBM’s Mediation Server in the
topology.
 Primary SIP server port only if it is not standard
Non-standard primary SIP server port: _______________________
This is the listening port defined for the SBM’s Mediation Server in the
topology. Figure 1-1 shows the default ports for TCP and TLS marked with
2.
Important Although all components are included within the SBM, you must specify the
correct ports, or the SBM will not function correctly.
Obtain the settings for your T1 or E1 lines from your PSTN carrier. You can
circle the correct setting in the table below.