SBM powered by Microsoft Lync Administrator's Guide 2010-11

A-44
Ready the Data Center for an SBM Deployment
Add the Survivable Branch to the Lync Server Topology
Figure A-41. Lync Server 2010 Control Panel > Network Configuration > Global
Window
f. Click Commit.
27. If Media Bypass uses the site and region configuration, you must define
your regions, sites, and subnets appropriately (use the Region, Site, and
Subnet tabs in the top navigation bar). For example, create a new site for
the branch within the region associated with the SBM’s parent central site.
You could then associate that site with all of the branch’s subnets, includ-
ing the one on which the SBM resides.
Because the site and region configuration can take many forms based on
your environment, this guide will not include steps. Refer to Microsoft
documentation and the HP Survivable Branch Communication zl Mod-
ule powered by Microsoft Lync
TM
Planning and Design Guide.
28. You will now create the Health Monitoring pool. Open the Lync Server
Management Shell. (Make sure to open this shell and not the Powershell
for the Windows Server 2008; otherwise, you will receive an error stating
that the command is not recognized.)