SBM powered by Microsoft Lync Administrator's Guide 2010-11

C-18
Command-Line Reference
Windows Administration Context
interface
This command moves you to an interface configuration context.
Syntax: interface <1 | 2 | management>
Type 1 to configure the Internal Ethernet Port 1 (corresponds with the <slot-
ID>1 port in the HP zl switch CLI).
Type 2 to configure the Internal Ethernet Port 2 (corresponds with the <slot-
ID>2 port in the HP zl switch CLI).
Type management to configure the Management port on the front panel of the
SBM.
Note The Management port is not functional for beta implementations.
page
This command enables and disables page mode. In page mode, the terminal
output will pause when it fills the screen and wait for a keystroke such as
space
or [Ctrl][C].
This command is available from all contexts.
Syntax: [no] page
ping
This command sends an ICMP echo packet to the specified IP address. You
can use it to test IP connectivity.
Syntax: ping <IP address>
reboot
This command powers down the SBM and reboots it.
Syntax: reboot