SBM powered by Microsoft Lync Administrator's Guide 2010-11

C-32
Command-Line Reference
Services OS Manager Context Commands
exit
The exit command moves you back to the host HP zl switch CLI.
Syntax: exit
This command is available from all contexts.
ip
This is the only configuration command available from the Services OS
manager context. It allows you to configure an IP address and default gateway
on the Services OS so that the module can communicate with an FTP server.
To configure the module’s IP address, enter the following command:
Syntax: [no] ip < dhcp | address <module IP address/prefix length>>
Use the dhcp option to configure the module to receive a dynamic IP address.
Replace <module IP address/prefix length> with the module’s IP address and the
prefix length for the subnet.
To configure the module’s default gateway, enter the following command:
Syntax: [no] ip default-gateway <gateway IP address> >
Replace <gateway IP address> with the IP address the module’s default
gateway.
page
This command enables and disables page mode. In page mode, the terminal
output will pause when it fills the screen and wait for a keystroke such as
space
or [Ctrl][C].
Syntax: [no] page
ping
Use this command to send an ICMP echo to a specified destination.
Syntax: ping < IP address >
Replace <IP address> with the IP address of the ping destination.