SBM powered by Microsoft Lync Administrator's Guide 2010-11

2-6
Complete the Setup Wizard
Using the Setup Wizard
 You might see the location for a log file. You can then access the SBM via
RDP, navigate to the log file’s location, and read the log for detailed
messages. You can also insert a USB storage device in the SBM’s USB slot
(make sure to use the slot on the SBM’s front panel and not the USB slot
on the HP zl switch chassis). Then you can copy the log file to the USB
storage device and send the file to an expert for help.
Figure 2-2. Setup Wizard—Example Failed Details
Start the Wizard
You are now ready to start the wizard:
1. If you want, read through the product overview. Click Next.
2. The next page provides an overview of the setup process. The two tasks
under Step 1 should already be completed. (If they are not, refer to the HP
Survivable Branch Communication zl Module powered by Microsoft
Lync
TM
Installation and Getting Started Guide for instructions.) You
have also completed the first two tasks under Step 2. You will now
complete the other tasks.
Log file
location
Cmdlet