SBM powered by Microsoft Lync Administrator's Guide 2010-11

2-57
Complete the Setup Wizard
PSTN Configuration
Figure 2-43. Setup Wizard—Gateway Controls and Gateway Status Window
29. The gateway status is displayed in the lower pane. You can start, stop, and
restart the gateway using the buttons in the Gateway Controls section.
The status automatically refreshes every five seconds. Refresh the status
with the Refresh Gateway Status button.
30. To finish the PSTN Wizard, close the window using the X in the top right
corner of the window. Move to “Connect to the PSTN Carrier” on page
2-59.
If the gateway will not start, see “Media Gateway Does Not Start” on page
2-64.
Background Information on PSTN Outward Number Masks
The outbound number mask is a regular expression that:
 Selects incoming phone numbers based on specific criteria
 Outputs all or part of the phone number as the dialed number in the
outbound PSTN call
The mask as a whole selects incoming phone numbers. But the Media Gateway
outputs only the portion of the mask that is within parentheses.
For example, examine the default PSTN outbound number mask:
([\+]?[-\*\#\d]+)