SBM powered by Microsoft Lync™ Administrator's Guide 2011-11

1-2

Introduction

Ensure that You are Ready to Complete the Setup Wizard

See the HP Survivable Branch Communication zl Module powered by

Microsoft Lync

Planning and Design Guide for more details about all of

these features. See the HP Survivable Branch Communication zl Module

Installation and Getting Started Guide for

details about the SBM hardware.

Overview of This Guide

It is assumed that the SBM has been installed and the initial tasks necessary

for accessing the Setup Wizard completed. For those instructions, see the HP

Survivable Branch Communication zl Module powered by Microsoft Lync

Installation and Getting Started Guide.

This guide provides instructions for:

 Ensuring that you are ready to complete the Setup Wizard

 Completing the initial setup and testing the functionality

 Managing and monitoring the SBM locally on an ongoing basis

 Setting up remote management of the SBM

 Managing software updates

 Troubleshooting

Ensure that You are Ready to Complete

the Setup Wizard

Before you complete the SBM’s Setup Wizard, the company’s Domain or

Enterprise Admins and Lync Server designers must complete several initial

tasks in the data center. It is recommended that they read the HP SBM

Planning and Design Guide. At the very least they must complete the tasks

listed in Appendix A: “Ready the Data Center for an SBM Deployment.”

Do not move on until your data center contacts indicate that the tasks are

complete and give you the following information:

 Hostname (computer name) for the SBM

The SBM’s default hostname is its serial number, which you can see when

you check its IP address through the CLI. (See Chapter 2 in the HP

Survivable Branch Communication zl Module powered by Microsoft