SBM powered by Microsoft Lync™ Administrator's Guide 2011-11

1-6
Introduction
Ensure that You are Ready to Complete the Setup Wizard
Table 1-1. T1/E1 Digital Settings
Obtain the phone number for each line, including T1/E1, FXS, and FXO lines.
Table 1-2. Phone Numbers
Also verify that the standard ports used for Lync Server communications have
been opened on all firewalls between the SBM and the data center Lync Server
Pool.
The data center engineers have received instructions for readying the data
center. Verify that these tasks are complete:
 You have been assigned credentials for a user account with this member-
ship: RTCUniversalSBATechnicians.
 The SBM’s servicePrincipalName has been set to its FQDN.
 The SBM has been added to the Lync Server topology as a survivable
branch server (its FQDN is specified for the front-end server, Mediation
Server, and PSTN gateway).
Note The PSTN gateway cannot be an IP address; it must be the SBM’s FQDN.
Parameter T1 Line 1 T1 Line 2 T1 Line 3 T1 Line 4 E1 Line 1 E1 Line 2 E1 Line 3 E1 Line 4
Line coding ESF
D4
ESF
D4
ESF
D4
ESF
D4
CRC4
Non-
CRC4
CRC4
Non-CRC4
CRC4
Non-CRC4
CRC4
Non-CRC4
Frame
format
B8ZS
AMI
B8ZS
AMI
B8ZS
AMI
B8ZS
AMI
HDB3
AMI
HDB3
AMI
HDB3
AMI
HDB3
AMI
Switch type 4ESS
5ESS
DMS100
National
ISDN (NI2)
4ESS
5ESS
DMS100
National
ISDN (NI2)
4ESS
5ESS
DMS100
National
ISDN(NI2)
4ESS
5ESS
DMS100
National
ISDN (NI2)
Net5
(ETSI,
Euro
ISDN)
Net5 (ETSI,
Euro ISDN)
Net5 (ETSI,
Euro ISDN)
Net5 (ETSI,
Euro ISDN)
Circuit ID Phone Number