SBM powered by Microsoft Lync™ Administrator's Guide 2011-11

C-5
Command-Line Reference
Operator Context Commands
If other types of ONE Services zl Modules are also installed in the switch, the
host switch assigns the SBM and each ONE Services zl product a different
index number, based on the order in which each one boots. For example, if
you install the SBM and boot it first, the host HP zl switch assigns it the index
number 2. However, if you install another ONE Services zl Module first and
boot it, the host switch will assign the product running on that module the
index number 2. If the SBM is installed next and booted, the HP zl switch will
assign it the index number 3.
To view the index numbers, names, and their associated chassis slots, enter
the following command from the HP zl switch’s CLI:
hostzlswitch> show services
Table C-3 shows an example output for this command. In this example, the
host HP zl switch has assigned the SBM the index number 2.
Table C-3. CLI Display of Services
To access the manager context for the ONE-App OS on the SBM installed in
slots A and C, you would one of the following commands:
hostzlswitch> services c 2
hostzlswitch> services c name hp-sbm-branch
Table C-4 provides an example of a host switch that is running:
■ DCM on a ONE Services zl Module
■ SBM
On this host switch, DCM was installed and booted first, so the host switch
assigned it index number 2. It then assigned the SBM index number 3.
Table C-4. CLI Display of Services
Slot Index Description Name
C 1. Services zl Module services-module
C 2. Survivable Branch Module—Microsoft hp-sbm-branch
Slot Index Description Name
C,D 1. Services zl Module services-module
D 2. Data Center Connection Manager dcm
C 3. Survivable Branch Module—Microsoft hp-sbm-branch