SBM powered by Microsoft Lync™ Administrator's Guide 2011-11

C-10
Command-Line Reference
Manager EXEC Context Commands
To view the index numbers, names, and their associated chassis slots, enter
the following command from the HP zl switch’s CLI:
hostzlswitch> show services
Table C-5 shows an example output for this command. In this example, the
host HP zl switch has assigned the SBM the index number 2.
Table C-5. CLI Display of Services
To access the manager context for the ONE-App OS on the SBM installed in
slots A and C, you would one of the following commands:
hostzlswitch# services c 2
hostzlswitch# services c name hp-sbm-branch
Table C-6 provides an example of a host switch that is running:
■ DCM on a ONE Services zl Module
■ SBM
On this host switch, DCM was installed and booted first, so the host switch
assigned it index number 2. It then assigned the SBM index number 3.
Table C-6. CLI Display of Services
For example, if you want to enter the Manager EXEC context for the SBM’s
ONE App OS, enter one of the following commands:
hostzlswitch# services c 3
hostzlswitch# services c name hp-sbm-branch
To verify your location in the CLI, check the prompt. It is
hostzlswitch(hp-sbm-branch<slot ID>)#.
Slot Index Description Name
C 1. Services zl Module services-module
C 2. Survivable Branch Module—Microsoft hp-sbm-branch
Slot Index Description Name
C,D 1. Services zl Module services-module
D 2. Data Center Connection Manager dcm
C 3. Survivable Branch Module—Microsoft hp-sbm-branch