SBM powered by Microsoft Lync™ Administrator's Guide 2011-11

C-15
Command-Line Reference
Windows Administration Context
Syntax: [no] firewall
hostname
This command sets the hostname (computer name) for the SBM. You cannot
enter this command after the SBM has been joined to the domain.
Syntax: hostname <string>
interface
This command moves you to an interface configuration context.
Syntax: interface <1 | 2 | management>
Type 1 to configure the Internal Ethernet Port 1 (corresponds with the <slot-
ID>1 port in the HP zl switch CLI).
Type 2 to configure the Internal Ethernet Port 2 (corresponds with the <slot-
ID>2 port in the HP zl switch CLI).
Type management to configure the Management port on the front panel of the
SBM.
Note The Management port is not functional for beta implementations.
page
This command enables and disables page mode. In page mode, the terminal
output will pause when it fills the screen and wait for a keystroke such as space
or [Ctrl][C].
This command is available from all contexts.
Syntax: [no] page
ping
This command sends an ICMP echo packet to the specified IP address. You
can use it to test IP connectivity.
Syntax: ping <IP address>