SBM powered by Microsoft Lync™ Administrator's Guide 2011-11

C-21
Command-Line Reference
Interface Configuration Mode
show firewall
This command displays the status of the Windows firewall, whether on or off.
Syntax: show firewall
This command is available from all contexts.
show interfaces
This commands shows the three SBM interfaces and whether they are enabled
or not:
■ Internal Ethernet Port 1
■ Internal Ethernet Port 2
■ Management port
Syntax: show interfaces
This command is available from all contexts.
show ip
This command shows IP information for the three SBM interfaces:
■ Internal Ethernet Port 1
■ Internal Ethernet Port 2
■ Management Port
The IP information includes the interface’s DHCP setting and status, as well
as the interface’s IP address, subnet mask, default gateway, gateway metric,
DNS servers, and WINS servers. The command also outputs the SBM’s host-
name.
Syntax: show ip
This command is available from all contexts.