SBM powered by Microsoft Lync™ Administrator's Guide 2011-11

C-23
Command-Line Reference
Services OS Operator Context Commands
Services OS Operator Context
Commands
The Services OS operator context allows restricted access to some trouble-
shooting commands on the Services OS of the module.
To access this context, enter the following command from the host switch’s
operator-level context:
For example, if you want to enter the Services OS for the SBM in slots A and C,
enter one of the following commands:
hostswitch> services c 1
hostswitch> services c name svcs-mod
To verify your location in the CLI, check the prompt. In the Services OS
operator context, the prompt is one of the following:
■ hostzlswitch(svcs-mod-<slot ID>:SvcOS)>
This is the prompt that is displayed if you have entered the Services OS
CLI and the Services OS is booted.
■ hostzlswitch(svcs-mod-<slot ID>:App)>
This is the prompt that is displayed if you have entered the Services OS
CLI and the ONE-App OS is booted.
The commands in this section are the Services OS operator CLI commands
with the Services OS booted.
Syntax:
services <slot ID> < 1 | name svcs-mod >
Moves you to an OS context on the module.
Replace <slot ID> with the letter for the lower chassis slot in
which the module is installed. The Services OS context is
always assigned index number 1.