SBM powered by Microsoft Lync™ Administrator's Guide 2011-11

C-24
Command-Line Reference
Services OS Operator Context Commands
exit
The exit command moves you back to the host HP zl switch CLI.
Syntax: exit
This command is available from all contexts.
page
This command enables and disables page mode. In page mode, the terminal
output will pause when it fills the screen and wait for a keystroke such as space
or [Ctrl][C].
Syntax: [no] page
ping
Use this command to send an ICMP echo to a specified destination.
Syntax: ping < IP address >
Replace <IP address> with the IP address of the ping destination.
For example:
HP Switch(services-module-<slot ID>)> ping 10.1.1.1
When you send ICMP echoes, the module displays the ping statistics to
describe the types of responses the router receives.
show assigned-mac-address
This command shows the MAC addresses assigned to the SBM’s two internal
ports by the HP zl switch.
Syntax: show assigned-mac-address
You will primarily be interested in the MAC address for E2 (Internal Ethernet
Port 2) because this is the interface that your SBM will use to communicate
with rest of the network.