SBM powered by Microsoft Lync™ Administrator's Guide 2011-11

2-48
Complete the Setup Wizard
PSTN Configuration
Figure 2-33. Setup Wizard—Quick Setup Start Page
2. In the window that is displayed, click Next.
3. The Boards section is automatically populated with the telephony cards
that you have installed. Select the check box for a board that you want to
use.
4. The Interfaces section is automatically populated with an interface for
each interface on the card. Select the check boxes for the interfaces that
you want to use.
Make a note of the wanpipe ID for each interface; you might need this
information later for troubleshooting.
5. If you have multiple telephony cards, you can select others and then select
their interfaces.