SBM powered by Microsoft Lync™ Administrator's Guide 2011-11

2-56
Complete the Setup Wizard
PSTN Configuration
Figure 2-42. Setup Wizard—Quick Setup Complete Window
27. You have completed the configuration. You have several options for the
next step:
• If you added one or more FXO interfaces to the configuration, you
should calibrate the interfaces to fine-tune the audio level. The cali-
bration takes about three minutes per interface. Because calibrating
the interfaces requires the Media Gateway to reload, you should
complete this task now before the SBM is actively supporting Lync
users. Click Calibrate FXO lines and move to “Calibrate FXO Lines” on
page 2-60.
• If you do not need to calibrate an FXO line, apply your configuration
by restarting the gateway. Click Restart Gateway. Move to step 28.
• If you click Finish, the configuration is saved, but you must restart the
Media Gateway before you move on to the next page in the Setup
Wizard. Move to step 28.
28. You are moved to a window where you can check the gateway’s status. (If
you selected Restart Gateway, you will also see messages about the status
of the restart.)