SBM powered by Microsoft Lync™ Release Notes 1.00.2.00

4
Known Issues
Release 1.00.2.00
■ PR_61051 — From a Web browser interface, the first time Advanced --> PSTN Configuration
is selected, a blank screen may be seen (rarely occurs). Closing the window and re-opening
tends to solve the problem.
■ PR_61706 — On the certificate page of the installation wizard, choose an option that
requires a file import. If the “Certificate Import” field is left blank and then “Import” is clicked,
the error message “Please select file to upload” repeated twice.
■ PR_62470 — The first time that a Lync test call is attempted, it may fail with a 503 error.
Trying the same call again will result in a successful call.
To reproduce:
1. Install an SBM.
2. Go through the HP Install Wizard, stop at the “Lync test call” page
3. Make a Lync test call that you would expect to succeed
■ PR_62528 — Once the Setup Wizard is completed, the Web browser interface uses a
dashboard to monitor and manage the SBM. The dashboard requires the user to be a member
of domain groups that are created by the Lync infrastructure to manage the SBM. If the
domain credentials cannot be validated for any reason (e.g., access to domain controllers is
not available or cached credentials are not available), then the Web browser interface
dashboard cannot be run.
■ PR_62636 — In the Web Browser Setup Wizard or in the Command Line Interface, Manual
DNS configuration on an interface does not work correctly when DHCP is configured. As a
workaround, after configuration is complete, a Remote Desktop Session can be established
using the explicit IPv4 address and the network parameters altered through the Windows
user interface.
■ PR_63051 — When attempting to change the Windows Administrator password via the
Command Line Interface and the password doesn't meet the complexity requirements, the
failure text always states 'domain policy' which is not always accurate. The password could
be rejected prior to domain join, in which case, it is the local machine complexity
requirements that need to be adhered to.
■ PR_63254 — When using the following cards:
• J9518A Sangoma 4-port FXS Telephony Card
• J9482A Sangoma 4 Port FXS voice card for HP ONE Extended Services zl Module
It is very difficult to remove an installed cable from the FXS port by hand. A thin, hard, and
non-conductive material may be required to remove the cable in lieu of shutting down the module
and removing the PCIe card for easier access.
■ PR_64911 — Once the SBM has been joined to the domain, the Command Line Interface for
the SBM is primarily for the Local Administrator (SBMAdmin) to troubleshoot Remote
Desktop access or access to the Setup Wizard. At the present time, the CLI may accept