SBM powered by Microsoft Lync™ Release Notes 1.1.19.0
9
Known Issues
Version 1.1.19.0
3OHDVHHQWHUORJLQFUHGHQWLDOV
8VHUQDPHGRPDLQBXVHUQDPH
'RPDLQGRPDLQBQDPH
3DVVZRUG
2. Change the SBMAdmin account's password with the Windows net user command, then exit. In this example, the
password is being changed to pa55w0rd.
&?:LQGRZV?V\VWHP!QHWXVHU6%0$GPLQSDZUG
&?:LQGRZV?V\VWHP!H[LW
Press [ENTER]
6$&! [Press Ctrl-Z to exit here]
3. Log in to CLI context with SBMAdmin username and the password you just created.
Version 1.1.19.0
The following problems are known issues as of Version 1.1.19.0.
■ CR_948, PR_50995 - Receiving a RE-INVITE does not force a rekeying in SRTP.
■ CR_961, PR_52367 - In the WebUI and CLI, if a NIC is disabled, the MAC address shows up as all zeroes.
■ CR_1031, PR_54649 - The SBM and the switch need to have the same daylight savings time settings to ensure proper
operation on switch and module reboots.
■ CR_1173, PR_57544 - The SBM Technician role cannot access the event log for troubleshooting.
■ CR_1176, PR_57558 - In the WebUI, the PSTN Configuration Wizard does not provide an indication of failure if the
user attempts to start a service and that service fails to start.
■ CR_1209, PR_58861 - FXS Channel 3 audio quality is good but is not as good as other channels.
■ CR_1265, PR_60282 - When booted to the HP Service Operating System, the Hard Disk diagnostic throws an
exception if a Hard Disk is not discovered.
■ CR_1407, PR_64845 - The password criteria is not entirely given for the Windows Standard Password. The WebUI
and Documentation do not mention the minimum 8 character limit.
■ CR_1408, PR_64873 - After a long idle period, if a Lync test call is placed on the SBM's WebUI, an intermittent failure
may occur on the test call indicating a 504 server timeout. The next test call will work as expected.
■ CR_1410, PR_64912 - During an SBM restart, the event log reports several ESPd 4096 FLOW_CONTROL_ACTIVE
errors. These are erroneous and can be ignored.
■ CR_1412, PR_65396 - On the SBM, if there is a simultaneous Remote Desktop Session and a Command Line Interface
(CLI) session open to the SBM via the switch, conflicts may occur in the case of the network configuration. If the
Remote Desktop Session has the Network Settings Dialog open, attempts to change the network settings via the CLI
will result in error messages that are obscure. For example, Unable to execute command: value cannot
be null.
■ CR_1416, PR_66786 - The PSTN outbound number mask defaults to a value that is not compatible with many public
carriers.
The default mask is currently: ([\+]?[-\*\#\d]+)
and it would be better as: [\+]?([-\*\#\d]+)
■ CR_1422, PR_66793 - Incorrect time zone animation when set, then changed/updated.