Secure Access Configuration Guide For Wireless Clients Part Two: Wireless Data Privacy and Monitored Logon 2003-03

a. Follow the instructions using Configuring Scenario 3 to define a RADIUS
Authentication Service and associate it to the System Authentication Policy.
In addition, click the Supports Microsoft Attribute (RFC-2548) checkbox
to enable the RADIUS server to authenticate the user during PPTP session
negotiation.
Figure 4.3 – RADIUS Authentication Service
b. On the ACS, browse to Status -> Client Status and click Refresh User
Rights Now.
3) On the AP 420, configure open authentication wireless parameters.
a. From the AP 420 CLI, configure security suite 1 (open authentication, no
encryption).
HP ProCurve Access Point 420# configure
HP ProCurve Access Point 420(config)# int wireless g
Enter Wireless configuration commands, one per line.
HP ProCurve Access Point 420(if-wireless g)# security-suite 1
© Copyright 2005 Hewlett-Packard Company, LP. 10