Secure Access Configuration Guide For Wireless Clients Part Two: Wireless Data Privacy and Monitored Logon 2003-03

Figure 5.4 – System Authentication Policy

c. On the ACS, browse to Status -> Client Status and click Refresh User

Rights Now.

4) From the ACS, configure the ProCurve Access Control xl Module with the

DHCP Server IP Address to allow clients to use Real IP addresses for the

inner VPN tunnel.

Note: This assumes that the DHCP server is configured and ready to provide

IP addresses to clients.

a. On the ACS, browse to Network -> Network Setup and select the ACM

used for authenticating client. Configure the DHCP Server IP address and

save changes.