Secure Access Configuration Guide For Wireless Clients Part Two: Wireless Data Privacy and Monitored Logon 2003-03

¾ Remote Party Identity ID Type: Any

¾ IP Address: 42.0.0.1

¾ Protocol: UDP

¾ Port: L2TP (1701)

Figure 5.7 – Security Policy Editor

e. Expand the New Connection and click My Identity. In the Select Certificate

drop-down window, select “None”. Configure the following:

¾ Click the Pre-shared Key button and configure the IPSec pre-

shared key to match the key used on the ACS.

¾ ID type: IP Address

¾ Port: L2TP