Software Update Guide for 4.1.3.93 to 4.4.0.50

1
Introduction
Introduction
This document describes how to update a ProCurve Secure Access 700wl
Series system from version 4.1.3.93 to version 4.4.0.50, and discusses how to
reconfigure your system if you were using port subnets under 4.1.3.93.
Version 4.4.0.50 provides a number of new features, including:
■ Significantly enhanced support for multiple 802.1Q VLANs. This
feature required significant changes to the underlying product struc-
ture, and therefore will require some reconfiguration if port subnets
were configured under version 4.1.3.93. In addition, in support of this
feature, the configuration of the network communication settings on
the Access Controller 720wl and the Access Control Server 740wl has
changed.
■ Ability to act as a layer 2 entity and expose the actual MAC address
for real IP clients on the uplink port.
■ Support for traffic classification based on 802.1p, Differentiated
Services (DiffServ), IP Precedence, and Type of Service (ToS)
settings.
■ A new Authentication Service for active 802.1X/WPA authentication.
■ Specification of an external HTTP proxy server per Access Policy.
■ Expanded definition of a Location, to include an individual client
device identified by MAC address.
■ Support for SSLv3 for the Login, Logout and Stop pages. SSLv3 is
enabled by default.
■ Clock synchronization for connected Access Controller 720wls uses
the Access Control Server 740wl as the synchronization source.
See the Software Version 4.4.0.50 Supplement to the ProCurve Secure Access
700wl Series Management and Configuration Guide (December 2005) for a
more detailed description of these features.
See the ProCurve Secure Access 700wl Series Management and Configura-
tion Guide (December 2005) for instructions on using these features.