TMS zl Management and Configuration Guide ST.1.0.090213

D-111
Troubleshooting
Troubleshooting the TMS zl Module in Monitor Mode
Checking the Time
The TMS zl Module synchronizes its time from the host switch. You should
ensure that the switch has the correct time so that the module also has the
correct time. The time stamps on your log messages will then be accurate.
Viewing Log Messages
To use the log messages to monitor the TMS zl Module, complete the following
steps.
1. Click System > Logging.
2. Click View Log.
3. Use filters to display only the log messages that are helpful to you.
Note If you have used a named object in a policy, the log will show the name of the
object instead of the values that the object contains.
For example, you can use the Keyword field to perform specialized searches.
You may want to use the following fields in your Keyword searches. To see all
log message fields, go to Appendix C, “Log Messages.”
■ id=[log family]
The log messages are divided into families and subfamilies. See Appendix
C, “Log Messages” for a list of log family names.
■ mid=[integer]
The message ID can help you find specific messages. Message IDs are
unique within their log family, so you will need to search for both the log
family (id=[log family]) and the message ID.
■ srcport=[integer], dstport=[integer]
To find messages by the source or destination port, replace [integer] with
the port number.
■ proto=[protocol]
To search for a protocol by name instead of port number, replace [protocol]
with TCP, UDP, IKE, GRE, AH, ESP, and so on.