TMS zl Management and Configuration Guide ST.1.0.090213

2-27
Initial Setup in Routing Mode
Initial Setup
Access the TMS zl Module Product OS Context
The Product OS context is used to configure the firewall, IDS or IPS, VPN, and
other features provided by the TMS zl Module. There are two options for
entering this context.
The advantage of the first option is that it requires fewer keystrokes. The
second option, on the other hand, does not require you to know the index
number for TMS zl Modules on your host switch. However, you should have
already obtained this information by entering show services.
Option 1
You can access the Product OS by typing the index number associated with
the TMS zl Module. Use the following command, entered from either the
switch’s manager-level or global configuration context.:
For example, when you entered the show services command, you saw this
output:
Table 2-5. CLI Display of Services Example
You noted that the slots for your TMS zl Modules are C and E and that their
index number is 2. You want to access the Product OS for the first TMS zl
Module, so you enter this command:
hostswitch# services c 2
Syntax: services <slot ID> <product index>
Moves you to an OS context on the module.
Replace <slot ID> with the letter for the chassis slot in which
the module is installed.
Replace <product index> with the index number that your
particular switch has assigned the TMS zl Module.
Slot Index Description Name
C, D, E 1. Services zl Module services-module
C, E 2. Threat Management Services zl Module tms-module
D 3. Data Center Connection Manager dcm