TMS zl Management and Configuration Guide ST.1.0.090213

2-37
Initial Setup in Routing Mode
Configure Management Access
action •permit
•deny
• move <original position> to <new position>
The module checks the policies according to their
priority. Therefore, policies should be ordered from
more precise to more general, so that the module first
checks packets against the more precise policies, and
then it checks more general policies
protocol •any
• <0-255>
•tcp
•udp
• icmp < any | echo | timestamp >
•esp
•ah
• igmp
•gre
•l2tp
•ospf
•pim
•ip
service See “Services Available” in Appendix A: “Threat
Management Services zl Module Command-Line
Reference”for a table of the default service objects.
source address •any
•host <IP address>
• source network
• ip-range <start IP address> <end IP address>
• address <address object>
source port • port
• range <start port> <end port>
destination address •any
•host <IP address>
• destination network
• ip-range <start IP address> <end IP address>
• address <address object>
destination port • destination port
• range <start port> <end port>
Parameter Options