TMS zl Management and Configuration Guide ST.1.0.090213

2-54
Initial Setup in Routing Mode
Configure Management Access
Change the Operating Mode
The operating mode described in this chapter is routing. Because this is the
default operating mode, you should not need to change it. However, if for
whatever reason the current operating mode is monitor, follow these steps to
change the mode:
1. Select System > Settings and click the Operating Mode tab.
Figure 2-25. System Settings Operating Mode Window
2. Select Routing. See “Operating Modes” in Chapter 1: “Overview” for an
explanation of the operating modes.
3. Click Apply My Changes.
4. Click Save.
Change the Passwords
To configure new passwords for administrative users, follow these steps:
1. Select System > Settings and click the Passwords tab.
Figure 2-26. System Settings Password Window