TMS zl Management and Configuration Guide ST.1.0.090213

2-61
Initial Setup in Routing Mode
Configure Management Access
Configure Syslog Forwarding
To forward event logs to a syslog server, select System > Logging and click the
Syslog Forwarding tab. You can add up to three entries.
Figure 2-33. System > Logging > Syslog Forwarding Window
1. Select the Enable syslog forwarding check box.
2. Click Add Syslog Server. The Add Syslog Server window is displayed.
Figure 2-34. Add Syslog Server Window
3. For Address, type the IP address or FQDN of the syslog server.
4. For Port, type the port number of the syslog server. The well-known port
for syslog is 514.
5. From the Facility list, select the facility from which the events will be sent.
6. Click OK.
7. Click Save.