Manualshelf

TMS zl Management and Configuration Guide ST.1.0.090213

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
161162163164165166167168169170
2-65
Initial Setup in Routing Mode
Configure Management Access
Figure 2-38. System > Settings > SNMP Window
SNMPv1/v2c
To configure SNMPv1/v2c settings, complete the following steps:
1. From the System > Settings > SNMP window, select Enable SNMPv1/v2.
2. Under Enable SNMPv1/v2, click Add another community. The Add SNMPv1/v2
Community window is displayed.
Figure 2-39. Add SNMPv1/v2 Community Window
3. For Community Name, type the community name for the SNMP server.