TMS zl Management and Configuration Guide ST.1.0.090213

2-66
Initial Setup in Routing Mode
Configure Management Access
4. From the Role list, select Manager (read/write) or Operator (read only).
Select the role that corresponds with the community name that you typed
in step 3.
5. From the Write Access list, select Unrestricted (read/write) or Restricted
(read only). Select the access that corresponds with the community name
and role that you specified in steps 3 and 4.
6. Click Apply.
7. Click Save.
SNMPv3
To configure SNMPv3 settings, complete the following steps:
1. From the System > Settings > SNMP window, select Enable SNMPv3.
2. Under Enable SNMPv3, click Add another user. The Add SNMPv3 User win-
dow is displayed.
Figure 2-40. Add SNMPv3 User Window
3. For User Name, type the SNMPv3 username for the account.
4. For Role, select the role of the account: Manager (read/write) or Operator
(read only).
5. For Authentication Protocol, select the protocol used for the account: MD5
or SHA.