TMS zl Management and Configuration Guide ST.1.0.090213

2-67
Initial Setup in Routing Mode
Configure Management Access
6. For Authentication Passphrase, type the authentication passphrase for the
account.
7. For Privacy Protocol, select the privacy protocol used for the account:
None, DES, or AES. For the manager role, you must configure privacy
settings. For the operator role, you may optionally configure privacy
settings, but are not required to do so.
8. If you selected a protocol in the previous step, for Privacy Passphrase, type
the privacy passphrase for the account.
9. Click OK.
10. Click Save.
Configure Zones
For information on zones, see “Plan the Zones” on page 2-7. To associate a
VLAN with a zone, follow these steps:
1. Select Network > Zones > VLAN Associations.
Figure 2-41. Network > Zones > VLAN Associations Window
2. Click Add VLAN Association. The Add VLAN Association window is dis-
played.