TMS zl Management and Configuration Guide ST.1.0.090213

2-76
Initial Setup in Routing Mode
System Maintenance
For example:
hostswitch(services-module-C:HD)# show images
--------Image Repository---------
1) ST.3.2.090315
2) ST.3.3.090821
3) ST.3.4.091103
6. If the latest software image is not in the image repository, follow
steps 1 through 8 in “Update the Software with USB Drive” on page 2-80
to transfer the image folder to the module.
7. Uninstall the current product software:
For example:
hostswitch(services-module-C:HD)# uninstall product
8. Reinstall the product software:
For example, if the image directory is named ST.3.2.090311, you would
type:
hostswitch(services-module-C:HD)# install product
ST.3.2.090311
You can type the first few letters of the image directory name, then press
[Tab] to complete the name. You might need to type the last few characters
to complete the name.
Syntax: uninstall product
Uninstalls the current TMS zl Module software.
Press
[Enter] or type [y] for any prompts that are displayed.
Syntax: install product <directory>
Installs the latest software version on the TMS zl Module.
Replace <directory> with the name of the directory that
contains the new software image.
Press
<Enter> for any prompts that are displayed.