TMS zl Management and Configuration Guide ST.1.0.090213

3-8
Initial Setup in Monitor Mode
Deploying the TMS zl Module
Installing several TMS zl Modules in host switches in different LAN segments
will also increase the amount of traffic that is analyzed.
Figure 3-5. Deploying the TMS zl Module in Monitor Mode for Internal Protection
Both at the Perimeter and Inside the LAN
A TMS zl Module can be deployed to provide security both on the perimeter
and within the LAN. Implementing both methods allows you to check both
internal and external traffic.
For this use case, the TMS zl Module should be installed in a core routing
switch, which also connects directly to the WAN router.