TMS zl Management and Configuration Guide ST.1.0.090213

3-20
Initial Setup in Monitor Mode
Initial Setup
tion registration ID is printed on the front of this Registration Card. You will
need this subscription registration ID when you register the IDS/IPS signature
subscription.
Figure 3-8. HP ProCurve Threat Management Services x-Year IDS/IPS
Subscription Registration Card
TMS-Subscription Hardware ID. To obtain the TMS-subscription hard-
ware ID, complete the following steps:
1. Access the host switch’s CLI.
2. From the host switch’s manager-level context, enter the TMS zl Module’s
Services OS context:
Syntax: services <slot ID> 1
Moves you to the Services OS context.
Replace <slot ID> with the letter of the chassis slot in which
the module is installed.
Make sure you
have the correct
Registration Card
Locate the
subscription
registration ID