TMS zl Management and Configuration Guide ST.1.0.090213

3-21
Initial Setup in Monitor Mode
Initial Setup
You are now in the Services OS context, and you should see a prompt that
is similar to the following:
hostswitch(services-module-C:HD)#
3. Display the TMS-subscription hardware ID by entering the following
command in the TMS zl Module’s Service OS CLI.
4. Record the TMS-subscription hardware ID. (You may want to copy this
hardware ID to a text file.) You will use the TMS-subscription hardware
ID as you complete the registration process for the IDS/IPS signature
subscription.
Enter the IDS/IPS Signature Subscription ID on the My
ProCurve Portal
To register an IDS/IPS signature subscription, complete the following steps.
1. Open a Web browser and type https://my.procurve.com in the address bar.
Figure 3-9. My ProCurve Sign In Window
Syntax: licenses hardware-id tms-subscription
Displays the hardware ID for the IDS/IPS signature sub-
scription.