TMS zl Management and Configuration Guide ST.1.0.090213

3-39
Initial Setup in Monitor Mode
Configuring Management Access
1. Select System > Settings and click the Operating Mode tab.
Figure 3-21. System > Settings > Operating Mode Window
2. Select Routing or Monitor. See “Operating Modes” in Chapter 1: “Overview”
for an explanation of the operating modes.
3. Click Apply My Changes. Follow the prompts to reboot the module.
4. Click Save.
Change the Passwords
To configure new passwords for administrative users, follow these steps:
1. Select System > Settings and click the Passwords tab.
Figure 3-22. System > Settings > Password Window
2. From the User list, select manager (read-write) or operator (read only).
3. Type the Old password.
Note The default passwords are: manager = procurve; operator = operator.