TMS zl Management and Configuration Guide ST.1.0.090213

3-40
Initial Setup in Monitor Mode
Configuring Management Access
4. For New password and Confirm new password, type a new password for the
user. The new password cannot have more than 14 characters.
5. Click Apply My Changes.
Note The operator cannot change passwords. Operator is read only in all windows.
6. Click Save.
Configure DNS
To configure the DNS server settings, complete the following steps:
1. Select Network > Settings > General.
Figure 3-23. Network > Settings > General Window
2. For Primary Server, type the IP address of your primary DNS server.
3. Optional: For Secondary Server, type the IP address of your secondary DNS
server. If you do not have a secondary DNS server, leave this field blank.
4. For Domain Suffix, type the suffix of your DNS domain name.
5. Click Apply My Changes.
6. Click Save.