TMS zl Management and Configuration Guide ST.1.0.090213

3-44
Initial Setup in Monitor Mode
Configuring Management Access
To configure log settings, follow these steps:
1. Select System > Logging and click the Settings tab.
Figure 3-25. System > Logging > Log Settings Window
2. From the list, select the lowest severity level of the messages that you
want to forward.
3. In the space provided, type the number of duplicate messages that you
want to occur before a tally message is forwarded.
Figure 3-26. Duplicate Message Text Box
4. In the space provided, type the number of seconds that you want to pass
before a tally message is forwarded.
Figure 3-27. Time Limit Text Box
5. Click Apply My Changes.
6. Click Save.