TMS zl Management and Configuration Guide ST.1.0.090213

3-50
Initial Setup in Monitor Mode
Configuring Management Access
Figure 3-34. System > Settings > SNMP Window
SNMPv1/v2c
To configure SNMPv1/v2c settings, complete the following steps:
1. From the System > Settings > SNMP window, select Enable SNMPv1/v2 and
click Add another community. The Add SNMPv1/v2 Community window is
displayed.
Figure 3-35. Add SNMPv1/v2 Community Window
2. For Community Name, type the community name for the SNMP server.
3. From the Role list, select Manager (read-write) or Operator (read only).
Select the role that corresponds with the community name you typed in
step 2.