TMS zl Management and Configuration Guide ST.1.0.090213

3-58
Initial Setup in Monitor Mode
System Maintenance
For example:
hostswitch# boot product
System will be rebooted. Do you want to continue
[y/n]? y
Rebooting
The module is now restored to the factory default settings.
Updating the Module Software
The software for the module can be updated through the Web browser
interface or the CLI.
Update Software with the Web Browser Interface
You can use the Web browser interface to update the software image, but if
you need to uninstall and reinstall an image, see “Restore to Factory Default
Settings” on page 3-56.
1. Select System > Maintenance and then click the Update Software tab.
2. For Server Type, select FTP, TFTP, or SCP.
If you select FTP:
a. Server IP —Type the IP address of the FTP server in dotted-decimal
format.
b. User Name—Type the user name for an FTP account.
c. Password—Type the password for the user name that you just speci-
fied.
d. File Name—Type the name of the image file, including the extension,
for example, ST.3.2.091103.zip.
If you select TFTP:
a. Server IP —Type the IP address of the TFTP server in dotted-decimal
format.
b. File Name — Type the name of the image file, including the extension,
for example, ST.3.2.091103.zip.
If you select SCP:
a. Server IP—Type the IP address of the SCP server in dotted-decimal
format.
b. User Name—Type the user name for an SCP account.