TMS zl Management and Configuration Guide ST.1.0.090213

3-60
Initial Setup in Monitor Mode
System Maintenance
6. You would type the following:
hostswitch(tms-module-C)# copy ftp image 192.168.1.13
ST.3.2.090311.zip user PROCURVEU\IUSR_CA
After you press Enter, the module prompts you for the password.
Password: procurve
7. The image is copied to the module, then automatically installed. When the
prompt says that the installation is finished, reboot the module to com-
plete the update.
hostswitch(tms-module-C)# reboot
Update the Software from a TFTP Server. To update the module soft-
ware using a TFTP server, do the following:
1. Transfer the image folder onto a TFTP server.
2. Initiate a console session with the host switch.
3. Enter the Product OS context for the TMS zl Module.
hostswitch# services c 2
4. Copy the image from the TFTP server and install.
5. For example, suppose that you copied the images to a TFTP server that
has the parameters shown below:
• IP address—192.168.1.13
• Filename—ST.3.2.090311.zip (copied to the root directory)
6. You would type the following:
hostswitch(tms-module-C)# copy tftp image 192.168.1.13
ST.3.2.090311.zip
7. The image is uploaded to the module, then automatically installed. When
the prompt says that the installation is finished, reboot the module to
complete the update.
hostswitch(tms-module-C)# reboot
Syntax: copy tftp image <IP address> <path/file>
Copies and installs the latest software version of the TMS zl
Module from a TFTP server.
Replace <IP address> with the IP address of the server.
Replace <path/file> with the path and filename of the
software image, including the .zip extension.