TMS zl Management and Configuration Guide ST.1.0.090213

4-10
Firewall
Named Objects
For IP, range, and network address objects there are two entry types:
■ Single-entry—can be used in address groups, firewall access policies,
NAT policies, port triggers, and IPsec policy traffic selectors
■ Multiple-entry—can be used in address groups and firewall access
policies
To create an address object, follow these steps:
1. Select one of the following:
• Firewall > Access Policies and click the Addresses tab
• Firewall > NAT Policies and click the Addresses tab
• Firewall > Port Triggers and click the Addresses tab
2. Click Add an Address.
3. Type a name for the object in the Name field.
Note You can use only letters, numbers, and the underscore character (_) in
this field.
4. Do one of the following:
• Create an IP address object:
Figure 4-3. Add IP Address Object Window